Descargar Imprimir esta página

Bosch GLM 120 C Professional Manual Original página 23

Ocultar thumbs Ver también para GLM 120 C Professional:

Publicidad

OBJ_BUCH-3181-006.book Page 23 Thursday, April 12, 2018 9:20 AM
Safety Warnings for Battery
Chargers
This charger is not intended for use
by children and persons with phy-
sical, sensory or mental limitations
or a lack of experience or know-
ledge. This charger can be used by
children aged 8 and above and by
persons who have physical, senso-
ry or mental limitations or a lack of
experience or knowledge if a per-
son responsible for their safety su-
pervises them or has instructed
them in the safe operation of the
charger and they understand the
associated dangers. Otherwise,
there is a danger of operating errors
and injuries.
Supervise children during use,
cleaning and maintenance. This will
ensure that children do not play with
the charger.
Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
 Charge the measuring tool only with the supplied
charger.
 Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
 Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself.
Have repairs performed only by a qualified technician
and only using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of an electric
shock.
 Do not operate the battery charger on easily inflamma-
ble surfaces (e. g., paper, textiles, etc.) or surround-
ings. The heating of the battery charger during the charg-
ing process can pose a fire hazard.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
Bosch Power Tools
Product Description and Specifica-
tions
Please unfold the fold-out page with the representation of the
measuring tool and leave it unfolded while reading the operat-
ing instructions.
Intended Use
The measuring tool is intended for measuring distances,
lengths, heights, clearances and inclines, and for calculating
areas and volumes.
The measuring results can be transmitted to other devices via
Bluetooth® and USB data port.
Technical Data
Digital Laser Measure
Article number
Measuring range (typical)
Measuring range (typical under
unfavourable conditions)
Measuring accuracy (typical)
Measuring accuracy (typical un-
der unfavourable conditions)
Lowest indication unit
Indirect Distance Measure-
ment and Vial
Measuring range
Gradient measurement
Measuring range
Measuring accuracy (typical)
Lowest indication unit
General
Operating temperature
Storage temperature
Allowable charging temperature
range
Relative air humidity, max.
Laser class
Laser type
Laser beam diameter (at 25 °C)
approx.
– at 10 m distance
– at 100 m distance
Automatic switch-off after
approx.
– Laser
– Measuring tool (without
measurement)
Weight according to EPTA-
Procedure 01:2014
Dimensions
Degree of protection
English | 23
GLM 120 C
3 601 K72 F..
A)
0.08–120 m
B)
60 m
A)
±1.5 mm
B)
±3.0 mm
0.5 mm
0°–360° (4x90°)
0°–360° (4x90°)
C)/D)/H)
±0.2°
0.1°
E)
–10 °C...+45 °C
–20 °C...+70 °C
+5 °C...+40 °C
90 %
2
650 nm, <1 mW
9 mm
90 mm
20 s
G)
5 min
0.21 kg
142 (176) x 64 x 28 mm
IP 54 (dust and splash
proof)
1 609 92A 4F4 | (12.4.18)

Publicidad

loading