Publicidad
Idiomas disponibles
Idiomas disponibles
EN
1 - GENERAL INFORMATION
1.1. PRESENTATION OF INSTALLATION
The Wirefeeder DVU W500 has been specially developed for high standard applications that have particular requirements for the power source range of
DIGIWAVE II, an expert range for manual applications
Its optimized design makes it easy to use in a harsh environment whether for rolling (workshop trolley in option) or against exterior aggressive conditions
(wet, dust, projections, etc...)
The DVU W500 will allow you to achieve high quality welds with a nice appearance. The wire feeder can only be used in the DIGIWAVE II range.
Optimum use of the system requires full knowledge of this manual; it is important to follow all the instructions described in this document.
1.2. WELDING SET CONSTITUENT
The welding-set is comprise of :
a wire feeder,
An adapter for ecological spool,
User instruction
Safety instruction
1.3. TECHNICAL SPECIFICATIONS
Roller plate
Wire feed speed
Wire speed regulation
Wire dia. usable
Designed to fit through a manhole
Protection index
Insulation class
Standard
Torch connection
Duty cycle 60% at t=40°C
NOTE: This wirefeeder cannot be used in falling rain or snow. It may be stored outside, but it is not designed for use without protection during raining.
Degrees of protection provided by the covering
Code letter
First number
Second number
1.4. DIMENSIONS AND WEIGHT
Wire feeder DVU W500
This wire feeder isn't designed for automatic applications, and is only applicable for manual installations.
While welding in MIG, the tension is present on the MMA connection. In the same way, while welding in MMA, the tension is
present on the MIG torch connection and on the wire and the contact tube of the MIG torch if this one is still connected.
Avoid any contact of these connections with you or any other element: risk of electric arc (burning, dazzling, deterioration of
material)
IP
Equipment protection
2
Against the penetration of solid foreign bodies with Ø ≥12,5 mm
1
Against the penetration of vertical drops of water with harmful effects
3
Against the penetration of rain (inclined up to 60° in relation to the vertical) with harmful effects
Indicates that the protection test against detrimental effects due to water penetration has been done
S
with all parts of the equipment at rest.
DVU W500 - REF. W000372327
EN 60974 - 5 / EN 60974 - 10
Dimensions
Net weight
(L×W×h)
17.5 kgs
603 X 262 X 446
(without trolley option)
4 galets / 4 rollers
1 to 25 m / mn
Numerical
0.6 to 1,6 mm
yes
IP 23 S
H
European type
500 A
Packed weight
20 kgs
4
Publicidad
