Descargar Imprimir esta página

IKRA IB-LM 38 Manual De Usuario Original página 26

Cortacésped a batería

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45
ENGLISH
Never use the lawn mower with damaged protective
devices or grids or without attached protective devices,
e.g. B. baffles and / or grass catchers.
Start or operate the starter switch with caution according
to the manufacturer's instructions. Make sure there is suffi-
cient distance between your feet and the cutting knife (s).
The lawnmower must not be tilted when starting or
starting the engine, unless the lawnmower must be raised
during the process. In this case, tilt it only as far as is abso-
lutely necessary and only lift the side away from the user.
Never put your hands or feet on or under rotating parts.
Always stay away from the discharge opening.
Never lift or carry a lawn mower with the engine running.
WARNING
Risk of injury
Rotating blades may lead to serious injuries by cutting
or amputating parts of the body.
• Switch the mower off whenever carrying or inclining it or
when being outside a grass area. Wait until all rotating parts
have stopped.
• All protection covers and safety devices must be correct-
ly attached to operate the device.
• Never remove the collection bag when the machine is
being operated.
• Do not start the engine before your feet are in a safe
distance from the cutting tools.
• Do not incline the appliance when being started.
• Do not start the appliance when you are standing in front
of the ejection opening.
• Never touch under the housing body when the engine
is running. Keep a distance from the ejection opening
at all times.
• Any works / adjusting on the machine to be only perfor-
med with the engine switched off, contact key taken out
and when the mowing blade is not moving.
WARNING
Risk of injury
Thrown-off stones or soil may lead to injuries.
• Before mowing, check the area to be mowed for any
undesirable objects.
• Make sure the collection bag is properly suspended.
• Wear safety goggles when working.
• Stop the machine and take out the contact key. Wait
until all rotating parts have stopped and the unit has
cooled down. Take out the key.whenever you leave the
lawnmower. before loosening blockages or clearing
blockages in the discharge channel.
• To release a blocked blade.
• Clean the mower or do any other works before checking
the mower.
• Check the machine if working perfectly after catching
an undesirable object. Repairs must be executed before
putting the machine into operation again..
26
If the appliance starts abnormally vibrating, switch the
engine off and search for the cause immediately. General-
ly, vibrations are a warning against operating failure.
The appliance must not be used if damaged or safety
equipment is defective. Replace any worn-out and dama-
ged parts. If the lawnmower begins to vibrate abnormally,
it is important to inspect it immediately.
- look for damage;
- make the necessary repairs to damaged parts;
- make sure that all nuts, bolts and screws are firmly
tightened.
The ON/OFF switch and safety switch must not be locked.
When working with this machine, do not use spare parts
other than those recommended by us. Using spare parts
not recommend by us can result in serious injuries to
persons or damage to the machine.
Despite the observance of the operating instructions
there still may be some hidden residual risks.
a) Make sure that all nuts, bolts and screws are tight and
that the device is in a safe working condition.
b) Check the grass catcher regularly for wear or loss of
functionality.
c) For safety reasons, replace worn or damaged parts.
d) Please note that on machines with several cutting
blades, the movement of one cutting blade can lead to
the other cutting blades rotating.
e) When setting the machine, make sure that no fingers
are trapped between moving cutting blades and statio-
nary parts of the machine.
f) Let the engine cool down before switching off the
machine.
g) When servicing the cutting blades, make sure that
the cutting blades can be moved even when the voltage
source is switched off.
h) For safety reasons, replace worn or damaged parts. Use
only original spare parts and accessories.
The appliance must be stored in a dry place and pro-
tected from frost.
Lock the device in a proper place to protect it from
unauthorised use.
Let the engine cool down, before you store the device in
a closed room.
CAUTION
Damage to health arising from vibrations to hand
and arms if the device is used for a long time or if the
device is not guided and evaluated properly.
Vibration damping systems are no guaranteed protection
against white finger disease or carpal tunnel syndrome.
Therefore, it is necessary to carefully check the state of
your fingers and wrist if you have regularly used the appli-
ance for a long time. If any symptom of the diseases above
appears, seek medical advice immediately. To reduce the
white finger disease risk, keep your hands warm and take
regular breaks during your work.

Publicidad

loading