Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
Hearing damage
A longer stay in the immediate vicinity of the running
unit may cause hearing damage. Wear ear protectors!
When working with the device, a certain level of
noise cannot be avoided. Noisy work should be
scheduled for hours, during which it is allowed by
statute or other local regulations. Adhere to any
applicable rest times and limit your working time to
the necessary minimum time.
APPLICATION TIPS
A medium cutting height is recommended for most
lawns. If you cut too low, the quality of the lawn will
deteriorate.
If the engine is working hard, the engine speed will drop
and the engine noise will change. Increase the cutting
height to reduce the engine load.
When mowing tall grass, reduce the speed at which the
device is pushed.
The mulching wedge is used when the grass should
MAINTENANCE AND STORAGE
DANGER
Switch the appliance off and remove the contact
key before any adjustment, cleaning and servicing
work. Wait until all rotating parts have stopped
and the appliance has cooled down.
Keep hands away from all cutting edges and moving parts.
Fingers can be pulled into cutting carriage and be cut or
crushed.
After every work stint, clean the machine thoroughly
to remove all dust and debris, and repair or replace any
faulty parts.
Check the collection bag at regular intervals for any wear
and aging.
Clean the ejection opening and cover at regular intervals.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body!
For your personal protection and the protection of people
nearby, suitable hearing protection must be worn.
Noise emission information in accordance with the
German Product Safety Act (ProdSG) and the EC Machine
Directive: the noise pressure level at the place of work can
exceed 80 dB(A). In such cases the operator will require
noise protection (e.g. wearing of ear protectors).
Please do also consider any local regulations concerning
noise protection!
remain on the lawn.
An overlapping working method is recommended when
mowing.
Mow 1-2 times a week during the main growing season.
Once the grass has grown longer (>10 cm), you should
only halve the grass height. The optimum section length
is 4 cm. Carry out several passes.
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp cloth
making.
Keep all nuts, bolts and screws tight to be sure the equip-
ment is in safe working condition;
Only a regularly maintained and treated appliance can
serve as a satisfactory aid. Insufficient maintenance and
care can lead to unforeseen accidents and injuries.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Using other spare parts can result in accidents/injuries of
the user. The manufacturer will not be liable for any such
damage.
Please contact our service department if you need acces-
sories or spare parts.
ENGLISH
DE
GB
FR
IT
ES
NL
PL
27
Publicidad
