Publicidad
Idiomas disponibles
Idiomas disponibles
Removing and inserting the oven door
1 First, fully open the door (as far as it will go).
2 Rotate with a screwdriver the two retainers
until the end position.
3 Slowly close the door to a 10-degree angle
(relative to the position of the fully closed door);
then pull the door.
INFORMATION!
To replace the door, follow the reverse
order. If the door does not open or close
properly, make sure the notches on the
hinges are aligned with the hinge beds.
WARNING!
When replacing the door, always
make sure the hinge retainersare
correctly placed in the hinge beds to
prevent sudden closing of the main
hinge, which is connected to a strong
main spring. There is a risk of injury.
EN 31
Publicidad
