EINHELL GE-DP 7935 N-A LL ECO Manual De Instrucciones Original página 17

wet conditions.
If there is a risk of flooding,
•
place the plug-in connections
in an area which is safe from
flooding.
Strictly avoid pumping aggres-
•
sive liquids and abrasive sub-
stances.
Protect the equipment from
•
frost.
Protect the equipment from
•
dry running.
Take suitable measures to
•
keep the equipment out of the
reach of children.
There is a risk of the liquid
•
becoming contaminated by
escaping lubricant.
2. Layout and items supplied
2.1 Layout (Fig. 1/2/3)
1. Universal hose connection
2. Fast connector
3. Intake cage
4. Integrated fl oat switch
5. Handle
6. Suspension eyelet
7. Non-return valve
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
GB
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Dirty water pump
•
Universal hose connection
•
Non-return valve
•
Fast connector
•
Original operating instructions
3. Proper use
The equipment you have purchased is designed
to pump water with a maximum temperature of 35
°C. This equipment must never be used for other
liquids, especially engine fuels, cleaning agents
and other chemically-based products!
Before you use the pump, clarify any possible
special conditions which need to be fulfi lled for
the installation!
For example, additional safety measures might be
needed if damage to property could result from a
power failure, soiling or a defective gasket.
Examples of such safety measures: Pumps run-
ning in parallel on a separately protected power
circuit, moisture sensors for switching off the
pumps, and similar safety arrangements.
Be sure to consult a professional plumber if you
have any doubt.
The equipment can be used wherever you want to
move water, e.g. in the house, in the garden, and
for many other applications. It must not be used to
operate swimming pools!
If you want to use the equipment in bodies of wa-
ter with a natural, muddy bottom, place the equip-
ment in a slightly elevated position, e.g. on bricks.
The equipment is not designed for continuous
operation, e.g. as a circulating pump in a pond. In
this case the equipment's anticipated life will be
greatly shortened because the equipment was
not designed for continuous loading.
- 17 -