dirna Bergstrom Scania COMPACT 1.4 Instrucciones De Montaje página 16

COMPACT 1.4
EN
®
9
Rout the cable inside the A-pillar cover along with
other cables.
10
Loosen the door seal next to the instrument panel
and insert the cable in the gap between the A-pillar
and instrument panel.
11
Remove cover to power central, to the right is the
Body Builder Power Central, highlighted with a red
frame. Remove the two screws and pull out this
unit.
Make sure cable comes in a front-to-rear-direction
to the reverse side.
16