Publicidad
Idiomas disponibles
Idiomas disponibles
When carrying the objects, be sure to raise the guard
frames to prevent the objects from falling off the carrier.
Fig.19
► 1. Guard frame
Adjusting the handle height
NOTICE:
Fix the left and right handles at the
same height.
The handle height can be adjusted in 7 levels. To adjust
the handle height, loosen 2 knobs, then adjust the
handle height by aligning the hole on the handle with
the protrusion on the rear frame, and then tighten 2
knobs securely. Adjust the height of the other handle in
the same way.
Fig.20
► 1. Knob
1
1
Rear wheel lock
You can fix the direction of the rear wheels using the
rear wheel lock.
1.
Slightly move the machine forward so that the rear
wheels face the direction shown in the figure.
Fig.21
► 1. Rear wheel
2.
Rotate the rear wheel lock toward the rear.
Fig.22
► 1. Rear wheel lock
3.
Lock the other rear wheel in the same way.
4.
Move the rear wheel back and forth or left and
right slightly to make sure it is locked.
To release the rear wheel lock, rotate the rear wheel
lock 90° as shown in the figure.
Fig.23
► 1. Rear wheel lock
16 ENGLISH
1
1
1
Publicidad
