Publicidad
Idiomas disponibles
Idiomas disponibles
Switch settings
The following settings can be selected:
P
The appliance remains switched on as
long as the rotary switch is held in this
position
0
The appliance is switched off
I
Low power
II
Maximum power
Short-term operation
The appliance is designed to process
average domestic quantities of food; it
can be operated without interruption for
a maximum of 3 minutes, after which it
should be allowed to cool down to room
temperature.
Safety switch
A special safety switch in the motor housing
ensures that the appliance can only be
operated if the blender jug is properly
locked in position.
Before removing the blender jug, make
sure that the rotary control is in position 0.
This also applies when fitting the blender
jug to the motor housing. If the control is
not in its off-position (0), the motor will start
immediately.
Operation
∙ Fit the blender jug to motor housing,
with its handle to the right, in such a
way that the two triangle symbols are
aligned.
∙ Put the ingredients into the blender jug.
The jug has a maximum capacity of
1000 ml. To avoid possible foaming or
spilling when processing foamable or
thin liquids such as milk, do not fill the
jug over the 700 ml mark.
∙ Replace the lid so that the spout is
completely covered.
∙ Insert the stopper into the lid.
∙ To add ingredients during operation, the
stopper in the centre of the lid can be
removed.
∙ Do not put any objects into the blender
jug while the appliance is operating.
∙ Insert the plug into the wall outlet and
use the rotary control to select the
required power setting.
∙ Caution: Do not operate when the
blender jug is empty. Do not fill it with
dry items only, such as nuts, almonds
etc.
∙ After using the blender, switch off and
remove the plug from the wall socket.
Wait until the motor has come to a
complete standstill before removing the
blender jug.
13
Publicidad
