Reiner 880 Manual De Instrucciones página 63

REINER 880
1.7. Connecting Power Supply
Connecting the power supply
Only use REINER genuine accessories.
WARNING
Possible fire from incorrect mains voltage.
Check that the local mains voltage matches the voltage indicated on the mains adapter.
f
NOTICE
Incorrect order when connection to the mains may cause damage.
Observe the following order.
f
Connect the mains adapter plug to the mains unit of the
f
socket.
Connect mains line to the mains unit.
f
Connect mains line to the socket.
f
The device moves to the print mechanism audibly to the starting position.
1.8. Inserting Chipcard
Inserting Chipcard

The Chipcard function can be activated or deactivated in the menu
(see "Chipcard", page 82).
Hold the Chipcard
f
9
Insert Chipcard
f
10
card until it latches.
The set imprint appears in the display
The REINER 880 is ready.
1.9. Selecting language
See "Language", page 81.
f
1.10. Setting Date/Clock Time
See "Language", page 72.
f
Fig. B

Fig.
A + B
9
so that the chip points towards the front of the device.
into the Chipcard reader the direction of the arrow printed on the
1
.
12
REINER 800 connection
GB
63