Reiner 880 Manual De Instrucciones página 64

REINER 880
1.11. Inserting safety lock for print plate
The optional safety lock secures the print plate
Inserting safety lock for print plate
Grasp hood
f
3
thumbs .
Remove hood
f
Remove ribbon cassette
f
Insert safety lock with key into the receptacle for the safety lock
f
Turn key clockwise.
f
Remove key.
f
Apply ribbon cassette
f
the housing.
2
Push hood
f
1.12. Printing
Printing Fig.

NOTICE
Damage of the print plate or print wheels from unsuitable print media.
Do not stamp on staples, paperclips or similar hard objects.
f
The print action can be activated by toughing the button at the trip switch
with the print medium or light pressure on the trigger table
page 83). The maximum voucher printing thickness is 2 to 2.5 mm (80g/m 2 paper).
Depending on text plate used, up to 3 copies are possible.
Insert paper to be printed on.
f
Touch trip switch
f
Print is performed.
64
2
with both hands and slightly push down the triangular marks with both
2
and put it aside.
17
at the ribbed, gripping bar marked green.
17
and push it along the guide until it latches and is tight against
onto the device.
A + F
21
or push down trigger table
7
against unauthorised replacement.
Fig. B + C + E

5
.
16
.
21
5
(see "Trigger",