Milwaukee M18 BLSAG125X Manual Original página 20

TECHNICAL DATA
Type
Production code
Battery voltage
Rated speed
Thread of work spindle
D=Grinding disc diameter max.
d=Grinding disc hole diameter
b=Grinding disc thickness max.
b=Cutting disc thickness max. / min.
D=Sanding disc diameter max.
D=Wiring brush diameter max.
Weight according EPTA-Procedure 01/2014
(Li-Ion 2,0 Ah ... 12,0 Ah)
Recommended Ambient Operating Temperature
Recommended battery types
Recommended charger
Noise information: Measured values determined according to
EN 62841.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level / Uncertainty K
Sound power level / Uncertainty K
Wear ear protectors!
Vibration information: Vibration total values (triaxial vector
sum) determined according to EN 62841
Vibration emission value a / Uncertainty K
h
Surface grinding
Disc sanding
For other applications, e.g. Abrasive Cutting-Off Operations or Wire Brushing other vibration values could occur.
WARNING!
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in
EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration and noise emission may differ. This may signifi cantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
Read all safety warnings and all instructions.
WARNING!
Failure to follow the warnings and instructions may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
ANGLE GRINDER SAFETY WARNINGS
Safety Warnings Common for Grinding, Sanding, Wire Brus-
hing or Abrasive Cutting-Off Operations:
a) This power tool is intended to function as a grinder,
sander, wire brush or cut-off tool. Read all safety warnings,
instructions, illustrations and specifi cations provided with
this power tool. Failure to follow all instructions listed below may
result in electric shock, fi re and/or serious injury.
20
425049_M18BLSAG125X_125XPD_115XPD_1-0.indd 20 425049_M18BLSAG125X_125XPD_115XPD_1-0.indd 20
M18 BLSAG125X
Cordless Angle Grinder Cordless Angle Grinder Cordless Angle Grinder
4972 15 01
XXXXXX MJJJJ
18 V
11000 min
-1
M14
125 mm
22,2 mm
6 mm
3 mm / 1 mm
125 mm
75 mm
2,2 ... 3,3 kg
-18 ... +50 °C
M18B...; M18HB... M18B...; M18HB...
M12-18...; M1418C6 M12-18...; M1418C6
92,51 dB (A) / 3 dB (A) 92,51 dB (A) / 3 dB (A)
100,51 dB (A) / 3 dB (A) 100,51 dB (A) / 3 dB (A)
6,30 m/s² / 1,5 m/s² 7,10 m/s² / 1,5 m/s²
1,97 m/s² / 1,5 m/s² 1,82 m/s² / 1,5 m/s²
b) Operations such as polishing are not recommended to be
performed with this power tool. Operations for which the power
tool was not designed may create a hazard and cause personal
injury.
c) Do not convert this power tool to operate in a way which is
not specifi cally designed and specifi ed by the tool manufac-
turer. Such a conversion may result in a loss of control and cause
serious personal injury.
d) Do not use accessories which are not specifi cally designed
and recommended by the tool manufacturer. Just because the
accessory can be attached to your power tool, it does not assure
safe operation.
e) The rated speed of the accessory must be at least equal to
the maximum speed marked on the power tool. Accessories
running faster than their rated speed can break and fl y apart.
ENGLISH
M18 BLSAG115XPD M18 BLSAG125XPD
4972 25 01 4972 35 01
XXXXXX MJJJJ XXXXXX MJJJJ
18 V 18 V
11000 min 11000 min
-1
M14
115 mm 125 mm
22,2 mm 22,2 mm
6 mm 6 mm
3 mm / 1 mm 3 mm / 1 mm
115 mm 125 mm
75 mm 75 mm
2,2 ... 3,3 kg 2,2 ... 3,3 kg
-18 ... +50 °C -18 ... +50 °C
M18B...; M18HB...
M12-18...; M1418C6
92,51 dB (A) / 3 dB (A)
100,51 dB (A) / 3 dB (A)
7,10 m/s² / 1,5 m/s²
1,82 m/s² / 1,5 m/s²
-1
M14
19.12.22 15:15 19.12.22 15:15