Publicidad
Idiomas disponibles
Idiomas disponibles
NOW
TO SET UP YOUR
IMPORTANT: The outlet being used
UNiT
Location
of the Air Compressor
Locate the air compressor
in a
clean, dry and well ventilated area.
The air compressor
should be
located at least 12" away from the
wail or other obstructions
that will
interfere with the flow of air. The
air compressor pump and shroud
are designed to allow for proper
cooling. The ventilation openings
on the compressor
are necessary
to maintain proper operating
temperature.
Do not place rags or
other containers on or near these
openings.The
air filter must be kept
clear of obstructions
which could
reduce air flow to the air compressor.
GROUNDING
INSTRUCTmONS
Risk of Electrical
Shock,
In the
event of a short circuit,
grounding
reduces
the risk of shock by
providing
an escape wire for
the electric
current.
This air
compressor
must be propermy
grounded,
The portable air compressor
is
equipped with a cord having a
grounding wire with an appropriate
grounding
plug (see following
illustrations).
The plug must be used
with an outlet that has been installed
and grounded in accordance
with all
local codes and ordinances.
1.
The cord set and plug with this
unit contains a grounding
pin.
This ptug MUST be used with a
grounded outlet.
must be installed and grounded in
accordance
with all local codes and
ordinances.
2.
Make sure the outlet being used
has the same configuration
as the grounded plug. DO
NOT USE AN ADAPTER, See
illustration.
3.
Inspect the plug and cord before
each use. Do not use if there are
signs of damage.
Groundiing Pin
4.
If these grounding
instructions
are not completely
understood,
or if in doubt as to whether
the compressor
is properly
grounded, have the installation
checked by a qualified
electrician.
Risk of Electrical
Shock,
Improper
grounding
can resumt in electricam
shock,
Do not modify
the pBug provided,
If
it does not fit the available
outBet,
a correct
outlet
shouBd be installed
by a quaBified electrician,
Repairs to the cord set or pmug
MUST be made by a quamified
emectrician,
11-ENG
A09707
Publicidad
