Publicidad
Idiomas disponibles
Idiomas disponibles
6.
After the water has been drained,
close the drain valve (clockwise).
The air compressor
can now be
stored.
NOTE: If drain valve is plugged,
release a!I air pressure.
The valve
can then be removed, cleaned, the
reinstalled.
Air Filter inspection and
Replacement
and cylinder
smeeve are very hot.
Do not touch. AHow compressor
to
cool prior to servicing.
A dirty air filter will not allow the
compressor to operate at full
capacity.
Keep the air filter clean at
a!l times.
1.
Remove the air filter and make
sure it is clean.
IMPORTANT:
Do not operate
the compressor with the air filter
removed.
2.
If dirty, rinse air filter with warm
water and squeeze dry.
3.
Replace air filter.
NOTE: If the air filter is extremely
dirty it wilI need to be replaced. Refer
to the "Repair Parts" for the correct
part number.
Air Compressor
Pump
Intake
and
Exhaust
Valves
Once a year have a Trained Service
Technician check the air compressor
pump intake and exhaust valves.
17-ENG
A09707
Publicidad
