Urmet 1750 Manual Del Usuario página 7

DESCRIPTION OF TERMINALS
]
LINE IN System bus connection
}
S+
Call repetition
S-
]
CP Floor call
INSTALLATION
• Fix the bracket to the wall using a box 503 and the screws provided or a Ø 60 box with suitable
screws.
• Program the dip switches.
• Connect the wires from the system to the terminal board.
• Couple the monitor to the bracket and lock it by screwing fastening screws A.
A
6
503 box
A
Ø 4 mm max
slotted head or
Phillips cross head
Ø 60 box
DS1750-003