Descargar Imprimir esta página

Pando E-219 Manual De Instalación página 28

Ocultar thumbs Ver también para E-219:

Publicidad

Idiomas disponibles

Idiomas disponibles

English
INTRODUCTION
This manual and the enclosed instructions are a guide to the installation, use
and maintenance of your new cooker hood.
In order to install your extractor hood correctly and to know it well, we recom-
mend that you read these instructions carefully, as well as the enclosed user
manual, and keep them for possible future reference.
The entire installation process is reserved exclusively for qualified professio-
nals, professional installers or official service technicians. The instructions in the
hood installation manual or guide must be read and followed carefully before
starting the installation.
When you open the hood packaging, check that all the components are in per-
fect condition and that it contains all the mounting accessories. If this is not the
case, contact the seller and do not proceed with the installation. Aesthetic da-
mage to the appliance once it has been installed, such as scratches, knocks,
stains, etc., will not be covered by the manufacturer's warranty.
The protective plastic should not be removed from the
hood until installation has been completed, as any area
that does not have this plastic may be damaged during
installation. It is recommended to apply preventive me-
asures to protect against knocks, scratches and con-
tact with corrosive agents.
Special care should be taken during installation if there
are building works, as paint, silicone, plaster, cement
and other materials of this type, or cleaning products,
may contain corrosive chemical components that can
damage the steel or the product.
IMPORTANT!
Pando

Publicidad

loading