Publicidad
Idiomas disponibles
Idiomas disponibles
LED control. Setting mode with TOUCH RF remote control.
Brightness or Intensity adjustment:
1.
Switch on the bell light
Pando
2.
When the light is on, press and hold the "light" button to increase or decrease the intensity.
3.
If you release the light key during dimming or boosting, the light will remain at the chosen intensity.
integral
cooking
Colour or Temperature Adjustment ºK:
1. Make sure that the lights and fan are switched off.
2. By pressing and holding the TIMER key for 3", the light is switched on with the preset colour
temperature.
3. Press and hold the Light key to change the colour temperature.
4. As long as the key is held down, the colour temperature will change from warm to cool,
5. Simply press the light key to select the desired colour.
6. Exit the colour temperature selection function by pressing the ON/OFF key.
With this type of control we have several levels of adjustment of temperature
(ºK) or colour, and different levels of brightness or intensity. Once we have
Logo Tipogrà c
set the desired mode, it will retain the last designated setting.
Pando
integral
cooking
ON light
(3")
10........100%
100........10%
2700.........6000ºk
2700.........4000ºk
Publicidad
