Sony NSBK-EB05 Manual De Instalación página 9

This cable can connect up to four audio
inputs.
Analog camera
Analog
camera connector (black)
Caution
Do not input signals other than video
signals to the video input connectors of the
analog camera input cable.
4
If you want to control the analog
camera, refer to the "Connections
between the analog camera and the
NSR-500 series for controlling pan,
tilt, and zoom" section that follows,
and connect the analog camera to the
NSR-500 series.
Connections between the
analog camera and the
NSR-500 series for
controlling pan, tilt, and zoom
To control pan, tilt, and zoom on an analog
camera, connect the camera control cable
for the analog camera to either the RS-232C
2 connector or the RS-422/485 connector
(four pins on the right side of the alarm
output connector) on the NSR-500 series.
Step 2: Connecting the Analog Camera Input Cable and the Analog Camera
Analog camera cable
input connector
input cable
Video input
Audio input
Audio
connector
device
(white)
(RS-232C, RS-422, and RS-485 cannot be
used together simultaneously.)
For RS-232C (VISCA)
communication
Configure a daisy chain connection as
follows.
Maximum number of cameras: 7
Analog
camera
PTZ
For RS-422 (VISCA)
communication
Configure a daisy chain connection as
follows.
Maximum number of cameras: 7
4
Analog
camera
PTZ
For RS-485 (PELCO-D)
communication
Configure a star connection as follows.
Maximum number of cameras: 16
Analog
camera
PTZ
To RS-232C 2
connector
4
To RS-422
connector
To RS-485
connector
9