Publicidad
WARNING:
!
using electrical appliances, comply
If the
cord of this luminaire is damaged, it must be replaced by the manufacturer, or his after sale service, or any person of
equivalent quali cation only to avoid any
GENERAL INSTRUCTIONS
No-one, and in particular no child, must be in the vicinity of the
AVERTISMENT:
!
- The
supply must be
sure that it cannot be re-activated.
- Before drilling a hole,
The miroir must be installed by a quali ed electrician in accordance with the wiring standards in force in the country
where the installation takes place.
TECHNICAL SPECIFICATIONS - ENVIRONMENTAL PROTECTION
Tensión nominal
Frecuencia nominal
Potencia nominal
Lámpara
Categoría de protección
Pantalla de protección
WARNING!
!
This product bears a symbol relating to the disposal of
product must not be disposed of
EU Directive
environment. The electrical equipment contains hazardous substances
human health.
MISCELLANEOUS AFTERSALES SERVICE, REPAIRS, GUARANTEE, ETC.
This electrical product complies
original spare parts. Any failure to
after-sales service of the store
Information for the external connection box:
Switch off the power supply.
Connect the power supply to the terminal block according to the following connection colour code:
- Connect the Brown wire (Phase) to the corresponding terminal marked L on the terminal block.
- Connect the Blue wire (Neutral) to the corresponding terminal marked N on the terminal block.
- Connect the green/yellow wire (earth) to the corresponding terminal marked
Your mirror is now ready for use.
Switch on the power supply and switch on the mirror.
basic safety precautions in order to reduce the
The
o before installation, maintenance or cleaning. Remove the fuse or de-activate it, and
sure that there is no
of drilling through an
220-240V~
50/60Hz
MIR 60/70 LED / MAX.39W / LED 18W
MIR 80/70 LED / MAX.47W / LED 20W
MIR 90/70 LED / MAX.56W / LED 22W
MIR 120/70 LED / MAX.81W / LED 27W
MIR 60/60LED / MAX.29W / LED 14W
LED 3000-6500°K - IRC80
CLASSE II
IP 44
household
It means that this product must be recycled or dismantled in order to reduce its impact on the
the safety standards in force. Repairs must only be carried out by quali ed technicians using
you purchased this product.
cord must only be replaced by a
that the electrical speci cations of this miroir are
MIR 75/75 LED / MAX.40W / LED 17W
MIR 90/90 LED / MAX.52W / LED 20W
MIR 120/120 LED / MAX.85W / LED 27W
MIR 90/80 / MAX.48W / LED 12W
of electrical and electronic products. This means that this
but must be deposited in a recovery system in accordance
on the terminal block.
31
of re, electric
and personal
necessary, contact the
y.
Publicidad
