Unold GLAS Instrucciones De Uso página 38

DE
13. If the appliance is cold, you must add about 5 minutes to the desired cooking
time to let the appliance heat up. Tip: You can also pre-heat the appliance
EN
for 5 minutes without food and then add the ingredients to the glass basket.
14. Press the "Start/Pause" button once you have selected the desired program.
FR
15. The selected program starts, the display shows the temperature setting and
NL
remaining time, the fan is running, and you can see the illuminated heating
element through the glass basket. The remaining runtime is counted down
IT
to indicate the remaining cooking time.
16. Note: You can interrupt the program at any time by pressing the "Start/
ES
Pause" button, without discontinuing the program. To do this, you must
PL
press the "ON/OFF" button to switch the appliance off completely.
Continuation of program
17. To achieve better results, it may be necessary to shake (e.g. chips) or turn
(e.g. steaks) the ingredients in the glass basket halfway through the cooking
time.
18. To do so, use the handle to pull the glass basket out of the appliance. The
appliance switches off, and the time pauses. Gently shake the ingredients
in the glass basket. When cooking larger quantities, this process must be
repeated several times. Tip: To prevent the appliance from cooling down too
much, do not leave the glass basket out of the appliance for too long. Caution
– hot grease may splatter, causing burns!
19. Push the glass basket back into the appliance. As soon as the glass basket
is returned to the appliance, frying continues.
20. When the timer setting expires, three beeps sound and the appliance
switches off. Note: The fan in the appliance will continue to run for a while.
Frying with the user-defined program
21. Press and hold the "Function" button until the icon for the user-defined
program appears.
22. Now press the "Time/Temperature" button one, then select the desired time
using the "+" and "–" buttons. Then press the "Time/Temperature" button
again, and select the desired temperature using the "+" and "–" buttons.
You can set the time between 1 and 60 minutes in increments of one minute,
and the temperature between 65 and 200 °C in increments of 5 °C. If you
wish to adjust the time or temperature during operation, this is possible at
any time while the program is running.
38 von 144 Stand 31.7.2023