Publicidad
Idiomas disponibles
Idiomas disponibles
UPGRADE
•
Adjust the height of the feet to level the appliance and ensure good air circulation
in the lower parts of the appliance. Adjust the feet using a suitable wrench.
The above illustration is given by way of example. Differences are possible.
•
You can adjust the tilt by 0.5
•
If you need to move the appliance, set the feet to their minimum position so that the
appliance can be moved easily thanks to its bearings ( in
depending on the model). Upgrade the device again after the move is complete.
WARNING ! The bearings (depending on the mod è the) are not casters and they
must be used only at d é place the ' device to ' before or towards the ' arri è re. The D é lat
placements é raux can damage your floor and bearings.
to allow the doors to close automatically.
0
EN-14
Publicidad
