Publicidad
Idiomas disponibles
Idiomas disponibles
Location
The device should be installed far enough away from heat sources such
as radiators, boilers, direct sunlight, etc.
Warning !
It must be possible to disconnect the device from the mains supply; the plug must
therefore be easily accessible after installation.
FIRST USE
Before using the refrigerator, remove all packing materials and protections in
the refrigerator.
Adjust the adjustable feet and clean the inside and outside of the refrigerator with
water and a mild detergent solution. Rinse thoroughly and dry with a soft cloth. Do not
start the refrigerator immediately after installation. You must wait 2-6 hours before
turning on the power when turning it on for the first time. To avoid accident, do not
cover the power cord. Before plugging in the appliance, make sure that the voltage of
the mains socket in your home corresponds to that indicated on the nameplate.
When the refrigerator is first installed, allow it to stabilize at normal operating
temperature for 2-3 hours before filling it with fresh or frozen food. If the device is
interrupted, wait 5 minutes before restarting it.
CONTROL PANEL
Use your device in accordance with the following commands; your device has the
functions and modes corresponding to the control panels shown in the images below.
When you turn on your device for the first time, the display panel icons backlight will
turn on. If no button has been pressed and the doors are closed, the backlight will turn
off.
DISPLAY PANEL AND CONTROL KEYS
WARNING ! To disconnect the device from the mains, you must unplug the device or
use a disconnecting device.
Use your device in accordance with the instructions for
control of the functions and modes described in the following paragraphs.
EN-19
Publicidad
