Publicidad
Idiomas disponibles
Idiomas disponibles
TRANSPORT AND HANDLING
When transporting, take the device by the base and gently tilt it up to
a maximum of 45 °. Never lift the appliance by the door handle. Do
not turn the device upside down or horizontally. Push the refrigerator
on the roller legs to move it.
INSTALLATION
Install the refrigerator on a flat and stable surface, which will prevent
any noise and possible vibrations from the appliance. Choose a dry,
well-ventilated place. Do not place the refrigerator near a heat
source, in direct sunlight, or near household appliances that produce
heat (oven, gas stove, etc.).
Do not install the refrigerator in a corrosive atmosphere.
Device ventilation
To improve the efficiency of the cooling system and save energy, it is
essential to ventilate the unit well to dissipate the heat. For this
reason, it is necessary to ensure that the free space around the
refrigerator is sufficient.
Suggestion: it is advisable to leave a minimum space of 100mm
between the back of the device and the wall, 100mm above, 100mm
between the side and the wall, as well as to leave the space in front
of the device completely free to allow the doors to open 132 °. As
presented below:
Freezer
7. Upper freezer drawer / compartment
8. Lower freezer drawer / compartment
9. Adjustable feet
EN-16
Publicidad
