Machine Maintenance; After Each Use; After Weekly Use - Tennant T1 Li Manual Del Operario

For cleaning machines, parts & supplies click/visit www.southeasternequipment.net
OPERATION
EN

MACHINE MAINTENANCE

To keep the machine in good working condition, simply
follow the machine's maintenance procedures.
FOR SAFETY: Before performing any maintenance
procedures turn the main power switch to the off
position.
FOR SAFETY: When servicing machine, all repairs
must be performed by a qualified service person.

AFTER EACH USE

1. Empty the recovery tank and thoroughly rinse with
clean water (Figure 22).
FIG. 22
2. Recharge the battery (See BATTERY CHARGING)
(Figure 23).
FIG. 23
3. Raise the scrub head to the transport position to
prevent flat spot on brush (Figure 24).
FIG. 24
12
For cleaning machines, parts & supplies click/visit www.southeasternequipment.net

AFTER WEEKLY USE

1. Clean the vacuum shut--off float (Figure 25) and
the vacuum intake screen of any debris buildup
(Figure 26).
ATTENTION: Be careful not to get water in vacuum
intake screen, vacuum damage may result.
FIG. 25
2. Remove the brush and check for entangled debris
(Figure 27). Replace brush if damaged or worn.
FIG. 27
3. Tilt the machine back and clean the underside of
the scrub head (Figure 28).
FOR SAFETY: Before tilting machine, turn the main
power switch to the off position and empty tanks.
FIG. 28
FIG. 26
Tennant T1 Li (09- -10)