Squeegee Blade Replacement - Tennant T1 Li Manual Del Operario

For cleaning machines, parts & supplies click/visit www.southeasternequipment.net
4. Wipe the squeegee blades (Figure 29). Replace
the blades if worn or damaged. Remove any
clogged debris inside both inlet openings.
FOR SAFETY: Before tilting machine, turn the main
power switch to the off position and empty tanks.
FIG. 29
5. Clean the machine with an approved cleaner and
damp cloth (Figure 30).
FOR SAFETY: When cleaning machine, do not
power spray or hose off machine. Electrical
malfunction may occur.
FIG. 30
6. Clean the solution hose screen (Figure 31).
FIG. 31
Tennant T1 Li (09- -10)
For cleaning machines, parts & supplies click/visit www.southeasternequipment.net
Inlet
Openings

SQUEEGEE BLADE REPLACEMENT

Tilt the machine back to access the squeegee blades.
FOR SAFETY: Before tilting machine, turn the main
power switch to the off position and empty tanks.
To remove the squeegee blades, lift the blade retainer
clip and pull the blade from the channel (Figure 32).
FIG. 32
For easy blade installation, the squeegee blades are
color coded to match the scrub head blade channel
(Figure 33).
Gray -- Outside Blade
Black -- Inside Blade
FIG. 33
To install blade, slide each blade into the appropriate
channel until retainer clip engages blade (Figure 34).
The squeegee blade ribs should face away from each
other.
FIG. 34
OPERATION
EN
Retainer
Clip
Gray
Black
13