HOT WATER
The HOT WATER function can be used to pre-
heat cups or add hot water manually.
To start & stop hot water, touch 'Hot Water' on
the screen.
Hot water limit is approximately 90 seconds.
Depending on the size of your cup, you
may need to touch the 'Hot Water' button to
stop pouring.
NOTE
You cannot run hot water and extract espresso
at the same time.
ADDING NEW DRINK
Touch 'Add New' in the menu screen to create
a customized drink. You can adjust parameters
based on a standard style and
save your own.
Add New
Alternatively, after manually adjusting
parameters touch the small icon
the current setting.
SETTINGS
To enter settings menu, touch the icon
on the upper right on the screen.
Quick Start Guide
Machine will guide you on screen, step by step
to make an actual coffee.
Auto Start
Auto Start is optional. It allows you to program
the specific time when the machine will
automatically turn on.
+
to save
Time and Date
Time and Date is optional. You can set time
and date.
Clean Cycle
The Cleaning Cycle cleans the shower screen
and back-flushes the group head.
A pop-up message will let you know when it
is time for cleaning.
Descale Cycle
Descaling prevents excess mineral and scale
build-up. A pop-up message will let you know
when it is time for descaling.
Brew Temperature
It allows you to adjust the recommended
extraction temperature.
Default Milk Temperature
It allows you to adjust default temperature on
all milk base drinks.
Water Hardness
It is to test water to set how often you need to
descale the machine.
Auto Off
This function sets how long the machine will
stay turned on before it automatically turns off.
Screen Brightness
You can adjust brightness of your touch screen.
Work Light Brightness
You can adjust brightness of your work light.
Sound Volume
You can adjust volume for alerts and reminders.
Demo Mode
It is for on-screen Oracle Touch
demonstration sequence.
Factory Reset
Use this function to reset all programmable
values back to the factory settings and delete all
custom drinks.
15