Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Be careful when you operate the machine.
10.1
START THE MACHINE
Use only approved outdoor extension cords.
1. Put the extension cord through the slot on the rear handle
and put it underneath the cord retainer.
2. Attach the outlet end of an extension cord to the plug on
the rear of the machine.
3. Push the trigger to start the machine.
10.2
STOP THE MACHINE
1. Release the trigger to stop the machine.
10.3
ADJUST THE LENGTH OF THE
CUTTING LINE
While you operate the machine, the cutting line gets worn
shorter. You can adjust the length of the cutting line.
1. Hit the trimmer head against the ground while you
operate the machine.
2. Line is automatically released and the cut-off blade cuts
the excess length.
10.4
OPERATION TIPS
Keep clearance between the body and the machine.
WARNING
NOTE
Cord
retainer
Extenstion
Plug
cord outlet end
WARNING
English
Do not operate the machine without guard in place.
Do these tips when you use the machine
•
Keep a firm hold with the two hands on the machine
while you operate the machine.
•
Cut tall grass from the top down.
If grass winds around the trimmer head:
•
Stop the machine.
•
Unplug the machine.
•
Remove the grass.
10.5
CUTTING TIPS
•
Tilt the machine toward the area to be cut. Use the tip of
the cutting line to cut grass.
•
Move the machine from right to left to prevent thrown
debris from hitting the operator.
•
Do not cut in the danger area.
•
Do not force the trimmer head into uncut grass.
•
Wire and picket fences cause cutting line wear and
breakage. Stone and brick walls, curbs, and wood can
wear the cutting line quickly.
8
WARNING
Publicidad
