Planika COMET BURNER Manual De Montaje página 16

FLAME HEIGHT REGULATION
When the flame is on, press the or button on the remote or scroll the flame level bar in the mobile app to choose
one of the six flame heights. The flame starts on height 4 by default.
NOTE. In case of too high a temperature of the device, the flame height will be automatically decreased and locked
from changing. If the temperature continues to increase, the flame will be extinguished.
1 st flame level 4 th flame level Cooling procedure
TURNING THE DEVICE OFF
To turn the device OFF, press .
(COOLING) indicated the device being cooled. Restarting the flame is possible only after complete cooldown of the
device (READY)- will appear on display.
Ready to use Cooling procedure Burner cooled
PANEL LOCK
To lock the device go to then click on and choose between and .
Click on to lock the control panel with Device Lock option. (DEVICE LOCKED) will display on screen whenever
you will try to click any button on the screen.
To disable the lock, press and hold button for 10 seconds, (DEVICE UNLOCKED) will display on screen.
Device Lock button in Menu Panel Lock menu Device Locked symbol Device unlocked symbol
Click on to lock the control panel with Child Lock option. To start the fireplace, press and hold button for 4
seconds. To disable the lock, press button in Panel Lock menu.
Panel Lock menu Child Lock activated symbol Child Lock deactivate symbol
The locks can overlap. To unlock a device with child lock and device lock active at the same time, unlock each one separately.
16