Publicidad
3
Connect printer Drucker anschließen Podłączanie drukarki
On the control panel, choose your connection method. If the printer will support multiple
EN
users, select Ethernet or Wi-Fi.
Wählen Sie auf dem Bedienfeld Ihrer Verbindungsmethode aus. Wählen Sie "Ethernet"
DE
oder "Wi-Fi", wenn der Drucker von mehreren Benutzern im Netzwerk verwendet wird.
Na panelu sterowania wybierz metodę połączenia. Jeśli drukarka będzie obsługiwać
PL
wielu użytkowników w sieci, wybierz opcję Ethernet lub Wi-Fi.
Ethernet
EN
1.
Connect an Ethernet cable from the printer to the same network as the computer.
2.
Press "Continue" on the control panel to confirm the IP address. Then continue
with the steps on the control panel until you reach the home screen.
Wi-Fi
1.
Make sure the computer Wi-Fi is turned on and in range of the printer
during setup.
2.
On the control panel, enter Wi-Fi information when prompted. Choose the
same network as the computer.
3.
Continue with the steps on the control panel until you reach the home screen.
USB
1.
Connect the USB cable to the port on the back of the printer and to
the computer.
2.
Continue with the steps on the control panel until you reach the home screen.
1
2
3
Publicidad
