Hilti SIW 6 AT-A22 Manual De Instrucciones Original página 12

down. If it is still too hot to touch after an hour, the battery is faulty.
Contact Hilti Service.
3 Description
3.1 Overview of the product
Square drive
@
Illumination
;
Forward/reverse switch with
=
switch-on interlock
Control switch (with electronic
%
speed control)
Grip
&
3.2 Intended use
The product described is a hand-held cordless impact wrench. It is designed
for tightening and releasing nuts, bolts, anchors and wood screws.
The impact wrench may be used only for applications that do not require
a precise/specified torque. Failure to observe this point presents a risk of
over-tightening and damage to the bolt, screw or workpiece.
Use only Hilti lithium­ion batteries of the B 22 series with this product.
•
• Use only Hilti-approved battery chargers to charge these batteries. More
information is available from your Hilti Store or from www.hilti.group
3.3 Items supplied
Impact wrench, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Store or at: www.hilti.group
4 Technical data
4.1 Impact wrench
Rated voltage
Weight including B22⁄8.0 battery
and chuck
Rated speed under no
load
Impact speed
8 English
1
(
)
+
§
/
:
21.6 V
5.29 lb
(2.4 kg)
Setting I 0 /min ... 1,000 /min
Setting II 0 /min ... 1,500 /min
Setting III 0 /min ... 2,700 /min
≤ 3,500 bpm
Torque display
Torque selector button
Belt hook (optional)
Battery
Battery charge status display
Battery release button
2124662
*2124662*