RHOSS Compact-Y SM TCAEY 122 P0 Instrucciones De Uso página 29

II.3.2 ACCESSORIES SUPPLIED LOOSE
KVDEV – 3-way deviator valve for DHW production, managed by
regulation (for THAEY).
KFA – Water filter.
KSA – Rubber anti-vibration mountings
KFI - Proportional electronic device for continuous regulation of fan
rotation speed up to -10 ° C outside air temperature in chiller operation
and up to 40 ° C outside air temperature in heat pump operation .
KRIT – Additional electrical resistance for heat pump, controlled by
regulation.
KEAP – Outdoor air temperature probe for set-point compensation.
Incompatible with the CS accessory.
KTR – Remote keypad for control at a distance with LCD display and
same functions as the machine. Connection must be made with a 6-
wire telephone cable (maximum distance 50 m) or with
KRJ1220/KRJ1230 accessories. For greater distances up to 200 m, use
an AWG 20/22 shielded cable (4 wires+shield, not supplied) and the
KR200 accessory.
KRJ1220 – Connection cables for KTR (20 m length).
KRJ1230 – Connection cables for KTR (30 m length).
KR200 – Remote Control Kit for the KTR accessory for distances
greater than 50 m and up to 200 m (AWG shielded cable not supplied).
KSC - Clock card for date / time display and machine management with
daily and weekly time bands (only in conjunction with KTR).
KRS485 – RS485 interface for serial communication with other devices
(proprietary protocol; Modbus RTU protocol).
KFTT10 - LON interface for serial communication with other devices
(LON protocol)..
KBE – Ethernet interface for serial communication with other devices
(BACnet IP protocol)..
KBM – RS485 interface for serial communication with other devices
(BACnet MS/TP protocol).
KUSB – RS485/USB serial converter (USB cable supplied).
Description and fitting instructions are
supplied with each accessory.
II.4 TRANSPORT - HANDLING - STORAGE
DANGER!
The unit must be transported and handled by
skilled personnel trained to carry out this type of
work.
IMPORTANT!
Be careful to avoid damage by accidental collision.
II.4.1 PACKING OF COMPONENTS
DANGER!
Do not open or tamper with the packaging before
installation. Do not leave the packaging within
reach of children.
ENVIRONMENTAL PROTECTION
Dispose of the packaging materials in compliance
with the national or local legislation in force in your
country.
The THAEY 122÷130 models are supplied:
 in cardboard packaging.
 protected above by a wooden frame;
 fixed to a pallet by 4 screws;
 tied down by two straps;
Each unit is supplied complete with:
 Instructions for use;
 Wiring diagram;
 List of authorised service centres;
 Warranty document;
 Use and maintenance manual for the pumps, fans and safety valves.
29
Compact-Y SM