Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
CANOPY
5)
• Attach the ends of the canopy to the
stroller frame by pushing each hook end
onto the frame. Secure the loops to the
stroller frame as shown (Fig. 5).
6)
• To open the canopy: push forward
on the front edge of the canopy. Push
downward on the canopy locks to secure
(Fig. 6a).
• To fold the canopy: pull upward on the
canopy locks and then pull backwards on
the front edge of the canopy (Fig.6b).
PARENT TRAY
WARNING:
Do not
place hot liquids or more
than 2 pounds in the parent
tray. Serious burns or
unstable conditions can
result.
7)
• Attach the parent tray to the frame by
wrapping the ends of the parent tray over
the handles of the frame and snap the
buttons from the frame and parent tray
together (Fig. 7).
7
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Loop
Hook
Fig. 5
Fig. 6a
Fig. 6b
Fig. 7
BRAKES
WARNING:
Always
set brakes when the stroller
is not being pushed so
that the stroller will not roll
away. NEVER leave stroller
unattended on a hill or
incline as the stroller may
slide down the hill.
8)
• To engage brakes, apply downward
pressure to the brake levers located on
the rear axle. The stroller may require
forward or rearward movement in order
to engage the brake (Fig. 8a). Check that
the stroller will not move once the brakes
are properly applied. To release, gently lift
up on the brake levers (Fig. 8b).
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
SAFETY
Fig. 8a
Fig. 8b
8
Publicidad
