CARE AND CLEANING
To maintain and protect the surface of your glass cooktop,
follow these steps:
1. Before using the cooktop for the first time, clean it with
a ceramic cooktop cleaner. This helps protect the top
and makes cleanup easier.
2. Regular use of a ceramic cooktop cleaner will help keep
the cooktop looking new.
3. Shake the cleaning cream well. Apply a few drops of a
ceramic cooktop cleaner directly to the cooktop.
4. Use a paper towel or a non-scratch cleaning pad for
ceramic cooktops to clean the entire cooktop surface.
5. Use a dry cloth or paper towel to remove all cleaning
residue. No need to rinse.
BURNED-ON RESIDUE
NOTE: DAMAGE to your glass surface may occur if you
use scrub pads other than those recommended.
1. Allow the cooktop to cool.
2. Spread a few drops of a ceramic cooktop cleaner on
the entire burned residue area.
3. Using a non-scratch cleaning pad for ceramic cooktops,
rub the residue area, applying pressure as needed.
4. If any residue remains, repeat the steps listed above as
needed.
5. For additional protection, after all residue has been
HEAVY, BURNED-ON RESIDUE
1. Allow the cooktop to cool.
2. Use a single-edge razor blade scraper at approximately a
45° angle against the glass surface and scrape the soil. It
will be necessary to apply pressure to the razor scraper in
order to remove the residue.
3. After scraping with the razor scraper, spread a few drops
of a ceramic cooktop cleaner on the entire burned residue
area. Use a non-scratch cleaning pad to remove any
remaining residue.
4. For additional protection, after all residue has been
removed, polish the entire surface with a ceramic
cooktop cleaner and a paper towel.
49-2001137 Rev. 1
NOTE: It is very important that you DO NOT heat the
cooktop until it has been cleaned thoroughly.
Ceramic
Cooktop
Cleaner
Clean your cooktop after each
spill. Use a ceramic cooktop
cleaner.
removed, polish the entire surface with a ceramic
cooktop cleaner and a paper towel.
Use a non-scratch cleaning pad for
ceramic cooktops.
The ceramic cooktop scraper and all recommended supplies
are available through our Parts Center. See instructions under
NOTE: Do not use a dull or nicked blade.
17