USING YOUR COOKTOP
Wi-Fi COMMISSIONING
Download the SmartHQ App
Press the WiFi Connect pad on your cooktop to begin
pairing. On the SmartHQ App, select your appliance and
follow the instructions to complete the pairing.
Turning Off the WiFi
Press and hold the WiFi Connect and All Off pads for 3
seconds to de-commission the WiFi.
BLUETOOTH
®
CONNECTIVITY
Your smart range is designed to provide you with Bluetooth
connectivity between your appliance and smart device. The
following features require a Bluetooth connection:
• Chef Connect
• OTR Microwave
• Vent Hood
• Kitchen Hub
• Precision Cooking
• Paragon Sous Vide Probe
• Hestan Cookware
Your smart range is limited to two active Bluetooth connec-
tions at any given time and up to 5 devices can be paired
with the range. Due to this, your range will automatically
prioritize the devices that should remain in connection and
temporarily disconnect all other connections. If multiple
attempted to be connected, your range will disconnect one
of the active devices to open up space for the new device
connection. NOTE: Chef Connect devices do not need to
be manually reconnected. The range will scan for known
devices and re-establish the connection on its own.
49-2001137 Rev. 1
Pairing a Bluetooth
®
Device
Press the Bluetooth Connect pad on the cooktop. The
cooktop will enter Pair mode. Tap cookware or press
ChefConnect button on enabled microwave or hood
device. When connected, the cooktop will display "donE".
Supported Devices
Hestan Cue fry pan
Hestan Cue pot
Removing Bluetooth
®
Devices
Tap and hold the Bluetooth Connect and All Off pads for
3 seconds.
NOTE: Your unit cannot delete a single or specific device.
All of your paired devices are cleared. Devices you wish to
use must be paired again.
How to Initiate Pairing
Tap pan handle twice
Tap pot handle twice
13