Display Unit - Chauvin Arnoux C.A 6250 Manual De Instrucciones

2.3

DISPLAY UNIT

Dual liquid crystal display
I
Other indications and symbols :
I
1 indicates that the buzzer/audible signal is activated
2 indicates the battery charge condition
3 indicates that temperature compensation is activated
4 indicates the metal selected for the temperature compensation function
5 indicates that data are being transmitted to the serial interface
6 Indicates the memory use level
7 PRINT: printing of current measurement
PRINT MEM: printing of stored data
MEM: storage of measurement
MR: retrieval and reading of a stored measurement
REMOTE: instrument remotely controlled via the RS 232 interface
8 measurement units of the result displayed
9 indicates the status of the instrument:
10 indicates the measurement mode selected
11 indicates the range and measuring current selected
12 Warning! Do not disconnect the measuring wires/presence of external voltage
13 indicates that the secondary function of a key will be used
14 indicates which alarm(s) are activated and their direction
Secondary display unit : measurement parameters / memory address
Main display unit : measured values
OPER: measurement in progress
ST BY: Standby -no measurement in progress - waiting for an action
28