Description; Liquid Crystal Display; Control Buttons - Chauvin Arnoux C.A 5205 Manual De Empleo

2 - DESCRIPTION

(See drawing in 11 - APPENDIX)
1

LIQUID CRYSTAL DISPLAY

I 2000 measurement counts (height of digits 16.5 mm)
Rate: 2 measurements / second
I Automatic display of all the symbols for commands, ranges and
functions
I
: low battery indication
I Overload indication: the 1 on the left flashes
2

CONTROL BUTTONS

To freeze the display on the last measurement
HOLD
Range selection:
RANGE
To change from automatic mode to manual mode, by prolonged press
on this button. The automatic mode is selected when the instrument is
switched on.
NB: The 200 mV AC range is only accessible on manual.
Press 3 times on the RANGE button to access this range.
3 FUNCTION SELECTOR SWITCH
OFF Off position
V DC and AC voltages up to 600 V
Continuity sound test for a resistance R < 700 Ω
Ω Ω Ω Ω Ω
Resistances up to 20 MΩ.
4 TERMINALS
Ø 4 mm safety terminals
I COM : common, terminal receiving the black lead
I + : terminal receiving the red lead
1
11