Teka RSR 41150 BU EU Manual De Instrucciones página 15

5 Using your refrigerator
Setting the operating
temperature
The operating temperature is
regulated by the temperature
control.
Warm
1 2
(Or) Min.
1 = Lowest cooling setting
(Warmest setting)
5 = Highest cooling setting
(Coldest setting)
(Or)
Min. = Lowest cooling setting
(Warmest setting)
Max. = Highest cooling setting
(Coldest setting)
The average temperature inside the
fridge should be around +5°C.
Please choose the setting according
to the desired temperature.
Please note that there will be different
temperatures in the cooling area.
The coldest region is immediately
above the vegetable compartment.
The interior temperature also depends
on ambient temperature, the frequency
with which the door is opened and the
amount of foods kept inside.
Cold
3 4 5
Max.
Frequently opening the door causes
the interior temperature to rise.
For this reason, it is recommended
to close the door again as soon as
possible after use.
Temperature Control And
Adjustment
Operating temperatures are controlled
by the thermostat (see diagram).
Settings may be made from 1 to 5, the
coldest position. When the appliance
is switched on for the first time, the
thermostat should be adjusted so
that after 24 hours, the average fridge
temperature is no higher than +5°C
(+41°F ).
We recommend
thermostat halfway between the 1 and
5 setting and monitor to obtain the
desired temperature i. e. towards 5 you
will obtain a colder fridge temperature
and vice versa. Some sections of the
fridge may be cooler or warmer ( such
as the salad crisper and the top part of
the cabinet ) which is quite normal.
Over ambient temperatures of 25°C
(77°F) especially in summer turn the
thermostat knob towards 5. Under
ambient temperatures of 25°C (77°F)
turn the thermostat knob to a half way
position.
Frequent door opening cause higher
internal temperatures, so close the
door as soon as possible after use.
14
EN
you set the