Installation Instructions - Westfalia 313 116 300 113 Instrucciones De Montaje

GB

Installation Instructions

Electrical Accessories Set
Westfalia Order No.:
Application:
General Instructions:
Please read these Installation Instructions before starting work.
Drilled holes must be deburred and then coated with zinc-rich paint.
The electrical set may only be installed by expert personnel, with the battery disconnected
and, if possible, with the aid of a device for maintaining the closed-circuit current.
All soldered connections must be insulated with a heat-shrinkable sleeve.
Failure of a direction indicator lamp, on the trailer too, is indicated by an increased flashing
frequency. This means there is no need to actually check the indicators.
Data may be lost when the battery is disconnected!
Please refer to the information provided by the manufacturer.
This wiring harness is equipped with a rear fog light switch-off function.
Important!
Please note the changes starting on page 26 for the Type 210 saloon and estate (T)
models as of 3/97.
Refer to page 27 for additional information on how to install the set in the Type C 208.
When a 7-pin adaptor is used, it must be disconnected from the socket after completion of
a journey with the trailer.
313 116 300 113/123/133
Mercedes-Benz Typ 210, all models
Saloon and Estate (T model)
Mercedes-Benz Typ 208 all models
313 116 391 103 - 001 - 03/08
15