Publicidad
Idiomas disponibles
Idiomas disponibles
SETTING
NEW EQUALIZATION
CURVES
MANUALLY
Up to four equalization
curves can be stored as the manual
modes M1-M4.
MI-M4
PRGM/
MANUAL
1
2
3
4
5
Press FREQUENCY
UP or FREQUENCY
DOWN
to select a frequency.
The level indicator of the selected frequency flashes.
Turn MULTI JOG to adjust the level of the selected
frequency.
Repeat
steps
1 and 2 to make
the desired
equalization
curve.
Within 4 seconds, press ENTER.
MEMORY is displayed for 8 seconds.
Within
8 seconds,
press
one of the graphic
equalizer
preset buttons Ml -M4.
The equalization curve is stored.
The equalization curve has been memorised to Ml.
To select a manual-preset
GEQ
1 Press PRGM/MANUAL
to select the manual mode. One of
the MANUAL indicators is selected.
2 Press one of the graphic equalizer preset buttons M1-M4.
To
cancel
the selected mode
Press the selected button again. "GEQ OFF is displayed.
The DSP (Digital Signal Processor) SURROUND adjusts the
reverb level and delay time to give a resonant surround sound
during playback, allowing you to enjoy the real sound presence
of different environments.
This
unit has been
programmed
with
4 different
DSP
SURROUND modes. You can also create and store up to 4 of
your own surround settings.
~-–=-=-. .—_-– ---
(
——.—4
When you select the programmed DSP SURROUND mode, the
scmnd presence of a disco (DISCO), live music performance
(LIVE), movie theater (MOVIE) or concert hall (HALL) can be
obtained.
Press PRGM/MANUAL
so that one of the PRGM indicators
is selected, then press one of the DSP buttons.
PRGM indicator
Equalization curves are selected automatically to match the DSP
modes and can also be selected or turned off to suit your
preference.
When the music source is monaural
Select LIVE or MOVIE to obtain a simulated stereo effect, When
DISCO or HALL is selected, no sound will be heard from the
surround speakers.
To cancel the selected mode
Press the selected DSP button again. "DSP OFF is displayed.
ENGLISH
8
Publicidad
