Safety Elements - BDS Maschinen MAB 855 Instrucciones De Manejo

Safety elements

Restart protection
Magnet indicator
Slip clutch
MAB 855
NOTE
► The machine stops automatically when the magnetic clamp
is switched off or if the power supply is interrupted.
In order to prevent the machine from starting unexpectedly after
switching on the magnetic clamp again or after reconnection fol-
lowing interruption to the power supply ("restart protection"), the
machine must be switched on using the ON/OFF switch.
The magnet indicator provides visual indication of the magnetic
clamping force.
■ Magnet indicator lights up
The magnetic clamping force satisfies the minimum require-
ments. The machine can used.
■ Magnet indicator lights up
Insufficient magnetic clamping force. Do not operate the
machine. This can be the case if the material is too thin, the
surface is uneven or if coated with paint, scale or zinc.
If the drill blocks, the gearbox is protected by a slip clutch.
GREEN:
RED:
Safety
39