Before Using For The First Time; Transport Inspection; Preparation; Additional Safety Measures For Certain Work - BDS Maschinen MAB 855 Instrucciones De Manejo

Before using for the first time

Transport inspection

Preparation

Additional safety measures for certain work

Non-horizontal work position
MAB 855
As standard, the machine is supplied with the components indicat-
ed in the Components/delivery contents section.
NOTE
► Check for visible signs of damage or missing items on
delivery. Report an incomplete or damaged delivery to your
supplier/retailer immediately.
This section contains important instructions on the required prepa-
ration before beginning any work.
Additional safety precautions must be taken when performing the
following work with the machine:
WARNING
Risk of injury from a falling machine.
When working in an inclined or vertical position and during
overhead work, the machine must be secured to prevent it from
falling using the safety chain (G) supplied.
► Check the safety chain for proper function before every use.
A damaged safety chain must not be used. Replace a dam-
aged safety chain immediately.
► Attach the safety chain in such a way that the machine
moves away from the operator in the event of slipping.
► Lay the safety chain as tightly as possible around the handle
of the machine.
► Check the secure fitting of the safety chain and lock before
starting work.
► Use the protective equipment stipulated in the section
sonal protective equipment.
Before using for the first time
Per-
43