Tenda K4P-4CR Guia De Instalacion página 4

English
Package contents
The K4P-4CR Kit is taken as an example here. The actual product prevails.
Network Video Recorder x 1
PoE Camera×4
Power adapter x 1
NVR installation package x 1
Screw: Thread diameter: 3.5 mm; Length: 5 mm; Head diameter: 6.5 mm
Camera installation package x 4
−Plastic anchor: Outer diameter: 6.6 mm; Inner diameter: 2.4 mm; Length
26.4 mm
−Screw: Thread diameter: 3 mm; Length: 25 mm; Head diameter: 6.0 mm
Camera mounting template×4
Mouse x 1
HDD×1
Only equipped in some kits
Appearance
Camera
NVR (The N6P-4H is taken as an example here.)
POWER
Hard disk drive
(HDD) screw hole
Wall mounting hole
When the arrow is at 12 o'clock position, the monitoring direction is the positive
direction.
Microphone
Ethernet port, 10/100 Mbps auto-negotiation
The camera supports the IEEE 802.3af standard, this port can be connected to
the PoE port of a PoE power sourcing equipment for power supply.
LED indicator
Solid blue: Initializing.
Solid green: NVR recording.
Blinking green: NVR working properly but not recording.
Solid red: NVR faulty (LAN port disconnected, or HDD faulty).
Grounding terminal
POWER POWER
Power port
10/100 Mbps PoE power supply and
data transmission multiplexing port
- 1 -
Screwdriver×1
HDMI cable×1
1m Ethernet cable×1
18m Ethernet cable×2
30m Ethernet cable×2
Surveillance sticker×1
Quick installation guide
10/100 Mbps LAN port
AUDIO IN port
1 3
IN
2 4
OUT
PoE PORTS LAN AUDIO
HDMI port
AUDIO OUT port
VGA port
HDMI VGA USB1 USB2
USB2.0 port