Tenda K4P-4CR Guia De Instalacion página 5

Port
Grounding terminal.
Connect the grounding terminal of the NVR to the earth or the ground terminal of the building
with a grounding cable to prevent static electricity or lightning from damaging the NVR.
Power port.
POWER
Use the included power adapter to power on the NVR.
Fast Ethernet port, which supports IEEE 802.3af/at PoE power supply. Used to connect to
cameras.
Tips
PoE
- Recommended Ethernet cable: CAT 5 or better.
PORTS
- Power supply distance:
• Normal Mode (default): Up to 100m
• Long-range Mode: Up to 250m
Fast Ethernet LAN port.
LAN
Used to connect to such devices as the router and switch.
Audio input port.
AUDIO
Used to connect to the audio input devices , such as pickups.
IN
Audio output port.
AUDIO
Used to connect to audio output devices, such as active speakers.
OUT
HDMI port.
HDMI
Connect your monitor or TV to this port using an HDMI cable for audio and video output.
VGA port.
VGA
Connect your monitor to this port using a VGA cable for video output.
USB 2.0 port.
USB
Used to connect to such devices as a mouse and a USB storage device.
Wall-mounting holes
Wall-mounting materials are self-prepared. Recommended specifications of the plastic
screws and anchors:
Screw: thread diameter: 3 mm, length: 14 mm; head diameter: 5.2 mm
Plastic anchor: inner diameter: 6.0 mm; length: 26.4 mm
I Install the HDD
If the kit does not include any HDD, please prepare it by yourself. You are recommended to use the HDD
dedicated for surveillance.
Tips
When installing or replacing the HDD, please cut off the power supply of the NVR, otherwise the HDD may not be
detected or even be damaged.
Use a screwdriver to unfasten the screws, then remove the cover of the NVR. Reserve the screws for
later use.
Description
Remove the cover
Flip
1 3
2 4
POWER PoE PORTS
-2-
IN
OUT
LAN AUDIO HDMI VGA USB1 USB2