Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
WARNING
To avoid serious personal injury and damage to the unit,
shut the unit off before removing or installing blower
tubes or nozzles.
WARNING
To prevent serious personal injury, never operate the
unit without the upper blower tube firmly installed.
INSTALLING THE BLOWER TUBE(S)
Always install the upper blower tube. The lower blower
tube is optional.
Installing the Upper Blower Tube
1. Align the slots on the upper end of the upper blower
tube with the bumps on the blower outlet (Fig. 1).
2. Insert the upper blower tube into the blower outlet
(Fig. 1).
3. While holding the handle, twist the upper blower tube
clockwise until it locks into place (Fig. 1).
Installing the Lower Blower Tube
1. Align the slots on the lower blower tube with the
bumps on the lower end of the upper blower tube
(Fig. 2).
2. Install the lower blower tube onto the upper blower
tube (Fig. 2).
3. While holding the upper blower tube, twist the lower
blower tube clockwise until it locks into place (Fig. 2).
REMOVING THE BLOWER TUBE(S)
Removing the Upper Blower Tube
1. Twist the upper blower tube counterclockwise until it
unlocks from the blower outlet (Fig. 3).
2. Remove the upper blower tube from the blower
outlet.
Removing the Lower Blower Tube
1. While holding the upper blower tube, twist the lower
blower tube counterclockwise until it unlocks from the
blower tube.
2. Remove the lower blower tube from the upper blower
tube.
WWW.SENIXTOOLS.COM
Bumps
Slot
Upper
Blower Tube
Fig. 1
Bump
Slot
Lower Blower Tube
Fig. 2
Slot
Upper
Blower Tube
Fig. 3
ASSEMBLY
Handle
Blower
Outlet
Upper
Blower Tube
7
Publicidad
