cecotec CONGA FLASH CONNECTED VITAL Manual De Instrucciones página 45

1. Unscrew the 2 screws on the battery slot, remove the battery cover and the battery. Fig.
27
2. Insert the new battery with the battery label facing up. Fig. 28
3. Place the battery and the battery cover in its place and fix properly the screws back again.
6. TROUBLESHOOTING
Robot signal
1 beep
2 beeps
Steady
red light
3 beeps
4 beeps
Cause
Omnidirectional
wheel error.
Side brushes error
Suction motor error
Main brush error
Solution
Clean the omnidirectional wheel and press the
Start/Pause button to restart the robot vacuum
cleaner.
Clean the side brushes and press the Start/Pause
button to restart the robot vacuum cleaner.
Remove the tank and empty it.
Remove the robot filter and shake off the dirt.
Remote and clean the main brush and press the
Start/Pause button to restart the robot vacuum
cleaner.
ENGLISH
45