Publicidad
Idiomas disponibles
Idiomas disponibles
A Removable water tank (1L capacity)
B Cup holder tray
C On/Off button
D Control panel
E Filter holder head
F Filter holder
F1 Filter 1 cup
F2 Filter 2 cups
F3 Filter for coffee pods (E.S.E.)
G Filter holding hook
H Steam nozzle
H1 Milk foam function
H2 Hot milk function
„ Pump: 15 bar
„ Power: 1350W
„ Voltage: 220 - 240 V
„ Safety devices against overheating
„ Dimensions: 285 x 143 x 285 mm
IMPORTANT!
This appliance is designed to operate at 220-240 V alternating current only.
This appliance is designed for DOMESTIC USE ONLY
FIRST USE OR IF THE MACHINE HAS NOT BEEN USED
IMPORTANT! Do not place heating elements on the appliance.
IMPORTANT! The safety instructions are part of the appliance.
Please read them carefully before using your new appliance.
If you have not used the appliance for more than 5 days,
empty and rinse the water tank.
To ensure your first cup of coffee tastes great, we strongly recommend that you rinse the espresso
machine with hot water, as instructed below:
1.
Remove the water tank (A) (1) and fill it (2). The water level should not exceed the "MAX" mark on
the tank and should contain at least 300 ml (= equivalent to 2 large cups). Then place it back on
the machine, ensuring that the cover is closed (3).
Connect the appliance to a mains socket (4).
2.
3.
Make sure the knob (M) is set to the preheat position (M1) (14).
DESCRIPTION
TECHNICAL SPECIFICATIONS
FOR A LONG PERIOD
I
Drip tray grill
J Removable drip tray
K Power cord
L Spoon-tamper
M Knob
M1 Preheat
M2 Hot water and steam preparation
N 1 cup Espresso button
O 2 cups Espresso button
P Steam button
1
Publicidad
