Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
RESIDENT - DIRECT COMMANDS USING THE HOUSE TELEPHONE
PROGRAM
DESCRIPTION OF FUNCTION OR SETTING
NUMBER
**04
ENABLE PARTY (LATCHED) MODE - RELAY 1
Party Mode will latch the relay and keep the entry device open to allow guests access to property.
To disengage party mode: Enter "*9" into the local telephone.
**05
DISABLE PARTY (LATCHED) MODE - RELAY 2
To disengage party mode: Enter "*5" into the local telephone.
*5
ACTIVATES RELAY 2
*9
ACTIVATES RELAY 1
**11
ENABLE "DO NOT DISTURB" MODE
This mode disables calls from the system to the house or forwarded telephone.
Factory Setting: Disabled
**12
DISABLE "DO NOT DISTURB" MODE
RESIDENT - DIRECT COMMANDS USING A FORWARDED TELEPHONE
PROGRAM
DESCRIPTION OF FUNCTION OR SETTING
NUMBER
0
By entering
extends talk time).
*5
ACTIVATES RELAY 2
*9
ACTIVATES RELAY 1
CALL WAITING (FOR LANDLINES)
Press "Flash" once to answer guest, press again to return to outside call on Telco line, if
pressed. If
*9
INSTALLATION
0
the audio is initiated for the resident to have a phone conversation with the visitor (also
(relay 1) or
*5
(relay 2) is pressed, the EL1SS will automatically return to the Telco line.
TEST
17
SET UP
PROGRAMMING
STEPS
**04
**05
**11
**12
PROGRAMMING
STEPS
*9
or
*5
is not
*5
*9
0
*5
*9
Publicidad
