Descargar Imprimir esta página

LiftMaster EL1SS-P Manual De Instalación Y Configuración página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

INTRODUCTION
MOUNT THE UNIT
1. Choose the mounting location for the unit.
2. Unlock faceplate and open.
3. Mark holes and pre-drill holes.
4. Mount to a solid surface or post (hardware not provided).
5. Ensure proper drainage away from the enclosure when installing.
Wall Mount
OVERVIEW OF TELCO WIRING
Many phone companies have updated their color standards due to
the use of Cat 5 cable for most phone line installs, and keep
residential and business installs in line with each other. In the new
standard, there is no green, red, black or yellow wires, they have
been replaced by white/blue, blue/white, white/orange, and
orange/white. If the wire is primarily orange with white stripes
then that color is orange/white. Refer to the table below. The NID
labels will most likely have the old coloring scheme on them, and
most telephone wiring components you can purchase will still
reflect the original colors.
Function
Old Color Standard
Tip 1
Green
Ring 1
Red
Tip 2
Black
Ring 2
Yellow
NOTES:
• Use 18 to 22 AWG twisted cable (Belden #9501 or equivalent)
for all telephone line connections.
• Avoid splicing wires when possible or use gel filled telephone
splice connectors to prevent connectivity problems.
• The voltmeter measurement between the Tip and Ring should
be between 48 and 53 Vdc.
• Never run data wires and high voltage wires in the same
conduit. The high voltage wires may interfere with the data
wires and cause the system to malfunction.
• Reversed polarity will not damage the unit, however, some
telephones will not function properly.
• The EL1SS is intended for use with a single access control
system (phone line can not be shared with multiple EL1SS's).
INSTALLATION
New Color Standard
White/Blue
Blue/White
White/Orange
Orange/White
TEST
Accessories: Optional method to mount.
LiftMaster Gooseneck Pedestal Post Models PED42 or PED64
Pedestal Mount
• Wire connectors can be
removed to simplify wiring.
• DO NOT overload wire
connectors. Use ONLY one
wire per hole.
Typical Telco Overview
Home Phone
12:00
AM
Dec. 31
MENU
REDIAL
TALK
OFF
FLASH
1
2
3
&')
ABC
DEF
4
5
6
GHI
JKL
MON
7
8
9
PQRS
TUV
WXYZ
0
#
OPER
Ring
18-24 AWG twisted cable
4
SET UP
Alarm System
Telco Entrance Box
Position
Demarcation Point
(Not Provided)
Tip

Publicidad

loading

Este manual también es adecuado para:

El1ss