Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
WIRING A GATE OPERATOR (NORMALLY OPEN)
The gate operator can be connected to Relay 1 or Relay 2. See the Set Up section for information about configuring Relays 1 and 2.
WIRING AN AUTO-CALL SENSOR
The Auto-Call feature will enable the unit to contact the resident when a driveway sensor (or any device that provides a contact closure)
is activated.
INSTALLATION
COM
(Common)
NO
(Normally Open)
TEST
• Wire connectors can be removed to simplify
wiring.
• DO NOT overload wire connectors. Use
ONLY one wire per hole.
NO
(Normally Open)
7
SET UP
Primary Gate
Operator
(Strike Open Input)
Loop
Detector
Loop Sensor
Publicidad
