Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
WIRING A GATE OPERATOR (NORMALLY OPEN) & A DOOR STRIKE LOCK
(NORMALLY OPEN)
The door strike can be connected to Relay 1 or Relay 2. See the Set Up section for information about configuring Relays 1 and 2.
AC or DC
Power
NOTE: For DC power
install a 1N4001 diode
or equivalent.
INSTALLATION
Door Strike
NOTE: Do not use
the unit's power supply
for the door strike.
NOTE: For AC power install a
Siemens S10K30 MOV
(Metal Oxide Varistor) or equivalent.
COM (Common)
NO (Normally Open)
TEST
COM
(Common)
8
SET UP
• Wire connectors can be
removed to simplify wiring.
• DO NOT overload wire
connectors. Use ONLY one
wire per hole.
Primary Gate Operator
(Strike Open Input)
NO
(Normally Open)
Publicidad
